JSPM's Bhivrabai Sawant Institute of Technology & Research, Wagholi, Pune

Gate No. 720/2, Nagar Road, Wagholi, Pune, Maharashtra 412207
Approved By AICTE, New Delhi, Govt.Of Maharashtra & Affiliated To Savitribai Phule Pune University
Institute is Accredited by National Assessment & Accreditation Council(NAAC), Bengaluru
and Electronics & Telecommunication, Electrical Engineering and Information Technology(IT) are accredited by National Board of Accreditation(NBA), New Delhi

Department Of Mechanical Engineering - Publication

  • Home -
  • Department Of Mechanical Engineering - Publication

Department Of Mechanical Engineering - Publication

Journal Title Author Description Type | Year
Effective Mass Ratio and Enclosure Size of a Particle Impact Damper for a Mild Steel Cantilever Beam under Transient and Forced Vibration. Prof. Dr. P. S. Kachare IJMAE Issue No. 01, 50 – 59; ISSN 0974 – 231 X International | 2010
Sustainable Rain Water Harvesting Scheme for Residential Complex in Magarpatta City, Pune Dr. Prof. Arun G. Patil Published paper entitled “Sustainable Rain Water Harvesting Scheme for Residential Complex in Magarpatta City, Pune” in International Journal of Emerging Technologies And Applications In Engineering, Technology And Sciences, ISSN: 0974-3588,April- International Journal | 2010
Fuzzy Hungarian Approach for Transportation Model Dr. Prof. Arun G. Patil Published paper entitled “Fuzzy Hungarian Approach for Transportation Model” in International Journal of Mechanical & Industrial Engineering ( IJMIE), ISSN No. 2231 – 6477, Volume-2, Issue-2 International Journal | 2012
Characterization of B4C Reinforcement on TI-6AL-4V Sintered Composite Prepared by Solid-State and Powder Processing Technique Method Dr. Prof. Arun G. Patil Published paper entitled “Characterization of B4C Reinforcement on TI-6AL-4V Sintered Composite Prepared by Solid-State and Powder Processing Technique Method” in International Journal of Emerging Technologies and Innovative Research, https://www.jetir.org/trackauthorhome.php?a_rid=183556. International Journal | 2016
Improve product quaity of Automotive valve and productivity of semi-automatic valve bending machine Prof. A. V. Talape JETIR International | 2019
Vehicle Suspension System Optimization Prof. Mrs. Varsha Amol Patil Vehicle Suspension System Optimization BOOK in Lambert Academic Publishing | 2022
PLM SOLUTION DESIGN FOR NEW PRODUCT DEVELOPMENT.-CASE STUDY Prof. Mrs. Varsha Amol Patil PLM SOLUTION DESIGN FOR NEW PRODUCT DEVELOPMENT.-CASE STUDY IJESRT - 4.116 | 2016
Review on vehicle suspension system and introduction of quarter car suspension system Prof. Mrs. Varsha Amol Patil Review on vehicle suspension system and introduction of quarter car suspension system journal - 5.731 | 2021
Quarter car model suspension system and its validation with the help of Simulink model Prof. Mrs. Varsha Amol Patil Quarter car model suspension system and its validation with the help of Simulink model journal - 5.731 | 2021
Natural convection heat transfer through vertical array with inverted trapezoidal fins Prof. A. M. Salwe 2015 at M.I.T.A.O.E.Alandi National | 2015
Effect of operating variables on local and Average heat transfer coefficient around a horizontal heating element in Gas-Solid fluidized bed Prof. A. M. Salwe M.I.T.A.O.E.Alandi. National | 2015
Experimental Analysis and Comparison of Heat Transfer with Different Particle Diameter and Power in Fluidized Bed Prof. A. M. Salwe (IIJME) ISSN 2321-6441, Volume 2, Issue 3, March 2014. International | 2014
Effect of velocity and particle size on the coefficient of heat transfer in fluidized bed heat exchanger Prof. A. M. Salwe (IJMERR) ISSN 2278-0149, Vol. 3, No. 2, April 2014. International | 2014
Convective Heat Transfer Comparison between Solid and Perforated Pin Fins Prof. A. M. Salwe (IJERGS) ISSN 2091 2730, Vol.2,Issue2,2014 edition International | 2014
Local heat transfer coefficient around a horizontal heating element in gas-solid fluidized bed Prof. A. M. Salwe ISSN2319–4847Volume2,Issue6 International | June 2013
Comparative study of Topological Optimization of Beam and Ring Type Structures under static loading condition Prof. Vani A Taklikar International Research Journal of Engineering and Technology (IRJET) International | 2015
Topological Optimization of Linear Elastic Isotropic Structures Using ANSYS based Optimality Criterion Approach Prof. Vani A Taklikar International Journal for Research in Emerging Science and Technologies International | 2015
Comparison of Topology Optimization Techniques for Beam and Ring Type Structures Prof. Vani A Taklikar International Journal for Research in Emerging Science and Technologies International | 2015
Evaluation of Cutting Parameters in Turning Operation of AISI 4140 using Al2O3 Inserts Via. Taguchi Method Prof. Prajakta N. Kadam Journal for Basic Sciences, Vol. 23, Issue 3, 2023, 865- 871 Q4, Scopus | 2023
An Atmospheric Plasma Spray and Electron-Beam Physical Vapour Deposition Process for Thermal Barrier Coatings: A Review. Prof. Prajakta N. Kadam Australian Journal of Mechanical Engineering ,Taylor and Francis, Vol. 21, Issue 15, 2023, 1729-1754 Q2, Scopus, ECSI, Compendex, INSPEC | 2023
An Investigation on the Microstructure, Thermo-physical and Mechanical Characterization of Laser Re-melted Plasma Sprayed 8YSZ TBCs. Prof. Prajakta N. Kadam Lasers in Engineering, Vol. 55, Issue 1-2, 2023, 3-19 Q4, SCIE, Scopus | 2023
Investigation of Microstructural and Mechanical Properties of 8YSZ Thermal Barrier Coatings: Atmospheric Plasma Spray vs Electron Beam Physical Vapour Deposition. Prof. Prajakta N. Kadam Tribology in Industry, Article in Press Q3, Scopus | 2023
Conference Title Author Description Type | Year
Static and dynamic analysis of composite ship propeller using FEA Prof. Dr. P. S. Kachare International conference on Mechanical and Industrial Engineering, ICMIE, ISBN: 978-93-81693-74-2 International | 2012
Design Analysis and Performance Evaluationof Reactive Silencer by SYSNOISE Prof. Mrs. Varsha Amol Patil Noise pollution created by engines becomes a vital concern when concern used in residential areas or area where noise creates hazard. Issues concerning the design and use of large-scale silencers are more prevalent today than ever before Two days National Conference – VISHWATECH 2014 | 2014
First post Graduate conference of Mechanical engineering Prof. A. M. Salwe Flora Institute of Technology, Pune on 19th and 20th July 2015. MECHPGCON | 2015
Selection of Parameter of Gas Metal Arc Welding For Optimum Weld Penetration Using Taguchi Method Prof. Vani A Taklikar Shri Ram Murti Smarak Institute, Bareily National Conference | 2014
An Optimization of Cutting Parameters to Prevent Chatter Vibration via. Taguchi Based RSM. Prof. Prajakta N. Kadam National Conference (SDME2018) National Conference (SDME2018) | 2018
An Evaluation and Optimization of Dynamic Cutting Forces to Prevent Chatter Vibration in Turning Operation of AISI 4140 using Al 2 O 3 insert. Prof. Prajakta N. Kadam Computational Methods and Health Sciences (ICCMEH2017), MIT Manipal 4 th International Conference (ICCMEH2017) | 2017
Fracture Analysis of 8YSZ Thermal Barrier Coatings with Edge and Internal Cracks under Thermal Loading: A Numerical Approach. Prof. Prajakta N. Kadam Materials and Technologies, (Material TECH 2022), NIT Raipur International Conference on (Material TECH 2022) | 2022
Influence of Spray Angle onto the Microstructural and Mechanical Properties of Air Plasma Sprayed 8YSZ TBCS. Prof. Prajakta N. Kadam Advanced Functional Materials: Future Perspectives (AFMFP), NIT Jalandhar International Conference on (AFMFP) 2022 | 2022
Taguchi-Grey Relation Analysis for Optimization of Process Parameters of TBCs using Atmospheric Plasma Spray, Prof. Prajakta N. Kadam Advanced and Emerging Materials for Technological Applications (AEMTA) ,SLIET, Longowal, IIT Jammu, NIT Delhi, and IAHT Ludhiana National Conference on (AEMTA) 2024 | 2024
Book Title Author Publisher Year
Hydraulic damper for controlling the car vibrations Prof. Dr. P. S. Kachare Lambert Academic Publishing (LAP), Germany 2011
Patent Details Author/Inventor Year